Cedar & Wood Shake Roofs: Step-by-Step Guide

Installing cedar & wood shake roofs requires specific technical knowledge, particularly in Michigan’s variable climate. This cedar & wood shake roofs step-by-step guide outlines the critical stages of installation and replacement, helping homeowners understand the craftsmanship required to protect their property. As one of the most visually distinct roofing materials, wood shakes demand strict adherence to building codes and manufacturer specifications to ensure longevity and weather resistance.

Phase 1: Inspection and Material Assessment

Before any work begins, a thorough assessment of the existing structure is necessary. In Metro Detroit, homes often face challenges from heavy snow loads and freeze-thaw cycles. If you are considering an upgrade or replacement, the first step is a professional inspection.

Best Choice Roofing provides free inspections and estimates for homeowners in Wayne, Oakland, Macomb, and surrounding counties. During this phase, we look for: * Structural Integrity: Checking the roof deck for rot or water damage. * Previous Repairs: Identifying botched DIY fixes or improper flashing that may have caused leaks. * Storm Damage: Assessing hail or wind impact that might necessitate an insurance claim.

If storm damage is evident, we offer full insurance-claim help to guide you through the paperwork. We never quote a firm price online; the roofer confirms exact pricing after a free inspection to ensure accuracy based on your specific roof dimensions and pitch.

Phase 2: Tear-Off and Deck Preparation

A successful wood shake installation relies on a clean, solid foundation.

  1. Removal of Old Materials: We strip the roof down to the sheathing. For homes with existing cedar shakes, we remove the old wood and any failing underlayment.
  2. Deck Repair: We inspect the plywood or OSB sheathing. Michigan winters can be harsh, and wet sheathing is a common issue. Any compromised wood is replaced to ensure the new fasteners hold tight.
  3. Drip Edge Installation: We install metal drip edges along the eaves and rakes. This is crucial for wood roofs as it protects the fascia and ensures water runs off cleanly into the gutters, preventing the wood shakes from wicking up moisture.

Phase 3: The Underlayment System

While the shakes provide the primary water shedding, the underlayment is the secondary barrier. This is where many inexperienced crews cut corners, but we follow a strict protocol.

Phase 4: Installing the Cedar Shakes

Installing the shakes requires patience and precision. The aesthetic appeal comes from the variation in the wood, but the function comes from the installation method.

  1. Starter Course: We install a doubled starter course at the eaves. This provides the necessary thickness for the first row of shakes to shed water effectively into the gutters.
  2. Coursing the Roof: We use chalk lines to ensure each row is straight. Shakes are typically installed with a specific exposure—usually 5 inches for a 24-inch shake and 7.5 inches for a 36-inch shake—though this varies by slope and local code.
  3. Fastening: We use corrosion-resistant fasteners, typically hot-dipped galvanized or stainless steel nails. Nails must be long enough to penetrate through the sheathing, usually 1.5 inches into the framing. We drive nails approximately 0.75 inches from the edges and 1.5 inches above the butt line, placing them under the overlap of the next course to hide them.
  4. Joint Staggering: The joints (the gaps between shakes) must be offset by at least 1.5 inches from the course below. This prevents water from funneling straight through the gaps and onto the deck.

Phase 5: Flashing and Ventilation

Proper ventilation extends the life of cedar & wood shake roofs.

Phase 6: The Ridge Cap and Finishing Touches

The final step is installing the ridge caps. These are thicker shakes pre-sawn to fit over the roof peak. We install them starting from the end opposite the prevailing wind to prevent wind-driven rain from lifting the caps.

Once the installation is complete, we conduct a thorough cleanup. We use magnetic rakes to retrieve nails and remove all debris. Our goal is to leave your property looking as good as, or better than, we found it.

Maintenance Considerations for Michigan Homeowners

Unlike asphalt shingles, wood shakes require a bit more attention. In a humid climate like Southeast Michigan, moss and algae can be issues. We recommend keeping branches trimmed back to allow sunlight and airflow. While some homeowners choose to apply stains or preservatives, it is essential to use products that allow the wood to breathe.

Why Choose Best Choice Roofing

Replacing a roof is a significant investment. As a licensed, insured Metro Detroit roofing crew, we handle the entire process so you don't have to. We offer same-day response on active leaks and storm damage. Whether you need a simple shingle repair, flashing fixes, or a full roof replacement, our services cover every aspect of roofing, including gutters and vents.

We pride ourselves on upfront pricing. You will know exactly what you are paying for before the work starts, with no hidden fees. If your roof has been damaged by a recent storm, our team can assist you with navigating the insurance claim process to ensure you get the coverage you deserve.

Ready to upgrade your home with premium materials? Call us today at (248) 206-5958 or request a free inspection at roofs.bestchoice411.com.