When your roof starts showing its age, the first question is usually how to fix it, not just which shingle to buy. For homeowners in Wayne, Oakland, and Macomb counties, deciding between a complete tear-off and a roof-over (overlay) is a major financial and structural decision. This tear-off vs roof-over (overlay) step-by-step guide breaks down exactly what happens during each process, so you can make a call based on the realities of Metro Detroit weather and building codes.
We know every situation is different. At Best Choice Roofing, we handle both roof replacement methods daily, but we never quote a firm price online. A roofer needs to physically inspect your deck to give you exact numbers. However, understanding the workflow helps you prepare for the project ahead.
For a broader comparison of pros and cons, check out our comprehensive overview on tear-off vs roof-over (overlay).
Before any work begins, a crew must assess the existing roof. You cannot legally or safely perform a roof-over in every situation.
A licensed contractor will check the rafters and trusses. Michigan winters bring heavy snow loads. If your structure is already sagging, adding the weight of a second layer of shingles (roughly 2.5 to 3 pounds per square foot) is a bad idea.
Most local building codes in Metro Detroit allow a maximum of two layers of shingles. If you already have two layers, a tear-off is mandatory. If you have one layer that is smooth and flat, you might qualify for an overlay.
We look for "squishy" spots when walking the roof. Soft areas indicate rotted decking. An overlay hides this problem; a tear-off fixes it. If we find significant water damage or mold, we will recommend a full tear-off to expose the sheathing for repairs.
An overlay is often faster and cheaper because it skips the demolition phase. Here is the day-of workflow for a standard roof-over.
Even though we aren't tearing off the old roof, we still protect your property. We cover siding and landscaping with tarps to catch loose granules and nails. Gutters are covered with strainers to prevent clogging from debris.
We cannot install new shingles over a loose surface. The crew walks the roof, re-nailing any loose shingles or flashing. We also install new metal flashings in the valleys and around penetrations like chimneys and plumbing stacks. Reusing old flashing is a common shortcut that leads to leaks, so we replace it.
The crew installs the new shingles directly over the old layer. We use longer nails (typically 1.5 to 2 inches) to penetrate through the old shingles and firmly into the wood deck. We start at the eaves and work up, ensuring proper nailing patterns and alignment.
Proper airflow is critical in Michigan to prevent ice dams. We install new ridge vents at the peak to ensure the attic can breathe, even with the extra layer of shingles. Finally, the ridge cap shingles are installed to seal the roof’s peak.
Timeframe: A typical overlay on a 2,000 sq. ft. home can often be completed in one day.
A tear-off is more invasive, but it gives you a brand-new roof system. This is the gold standard for long-term protection.
This is messy work. We place a dumpster close to the house (often on the driveway with plywood protection). We tarp the ground and sides of the home extensively. Magnets are used continuously to sweep the yard for nails.
The crew strips the roof down to the wood decking. We remove all shingles, underlayment, and flashing. This is the most labor-intensive part of the job. If you have two layers of old shingles, we remove both.
With the roof bare, we inspect every square inch of the plywood or planks. Rotted or soft wood is marked and replaced. This step is impossible with an overlay and is the primary reason to choose a tear-off. It ensures the nails holding your new roof have solid wood to grip.
In Metro Detroit, ice and water protection is non-negotiable. We install synthetic underlayment or asphalt-felt paper across the deck. Crucially, we add "ice and water" self-adhering membrane along the eaves, valleys, and around chimneys. This creates a waterproof seal that prevents leaks from ice backup.
We install new metal flashing in all valleys and around walls. Then, the shingles are installed according to manufacturer specifications. Because the surface is clean and flat, the lay is typically smoother and more aesthetically pleasing than an overlay.
Timeframe: A tear-off usually takes one to two days, depending on the size of the home and the amount of deck repair needed.
If your roof was damaged by a recent storm—hail is common in our area—the process involves an insurance claim.
We offer free inspections to determine if the damage is cosmetic or if it compromises the roof's life. If it’s storm damage, we can help you navigate the insurance claim. We meet the adjuster on-site to point out damage they might miss, ensuring you get the coverage you paid for.
Whether you pay out of pocket or go through insurance, we operate on upfront pricing. Once we inspect the deck and confirm the scope (tear-off vs. overlay), we provide a detailed written estimate. This includes the cost of materials, labor, dumping fees, and any necessary wood repair. You will know exactly what you are paying for before the crew arrives.
Choosing between these two methods comes down to condition and budget.
Ready to secure your home?
Best Choice Roofing is a licensed, insured Metro Detroit roofing crew serving Wayne, Oakland, Macomb, and surrounding Michigan counties. We offer same-day response on active leaks and storm damage.
Don't guess at the cost or the condition of your roof. We provide free inspections and estimates with full insurance-claim help. Services include roof leak repair, storm and hail damage, shingle repair, full roof replacement, flashing, vents, and gutters.
Remember, we never quote a firm price online; the roofer confirms exact pricing after a free inspection to ensure accuracy.
Call (248) 206-5958 or request a free inspection at roofs.bestchoice411.com.